null

5" Diameter Condenser Fan Motor, 1/10 HP, 208-230V, 1075RPM, 1/2" Shaft, 2243

(No reviews yet) Write a Review
SKU:
2243
UPC:
786382072797
MPN:
2243
Condition:
New
Availability:
Restocking Frequently – Order Now Before It’s Gone
  • 5" Diameter Condenser Fan Motor, 1/10 HP, 208-230V, 1075RPM, 1/2" Shaft, 2243
  • 5" Diameter Condenser Fan Motor, 1/10 HP, 208-230V, 1075RPM, 1/2" Shaft, 2243
  • 5" Diameter Condenser Fan Motor, 1/10 HP, 208-230V, 1075RPM, 1/2" Shaft, 2243
  • 5" Diameter Condenser Fan Motor, 1/10 HP, 208-230V, 1075RPM, 1/2" Shaft, 2243
  • 5" Diameter Condenser Fan Motor, 1/10 HP, 208-230V, 1075RPM, 1/2" Shaft, 2243
$182.06

Free ground shipping on orders over $35.00! Orders under $35.00 are a flat rate of $6.00! In the 48 Contiguous US States Only.

 

Frequently bought together:

Description

️ Condenser Fan Motor | 1/10 HP | 1075 RPM | 208–230V | Shaft-Down | Part #2243

Restore efficient airflow to your residential condensing unit with this brand-new condenser fan motor, part #2243. Featuring a compact 5" diameter clam shell housing and shaft-down mount, this motor is engineered for high-performance cooling in HVAC systems up to 3.5 tons. Its PSC design, ball bearings, and automatic thermal overload protection ensure smooth, reliable operation in demanding environments.

⚙️ Technical Specifications:

  • ⚡ Electrical Type: PSC (Permanent Split Capacitor)
  • Speed: Single (1075 RPM)
  • Voltage: 208–230V | Amps: 0.75 | Hertz: 60 Hz
  • Shaft: Flat ½" x 2-¾" | Mount: Stud | Bolt Circle: 4.312"
  • Frame: NEMA 56Z | Diameter: 5.0"
  • Rotation: Reversible | Bearings: Ball
  • ️ Enclosure: TEAO (Totally Enclosed Air Over)
  • Overload Protection: Automatic Reset
  • Construction: “Cap-Can” / “Clam Shell” style
  • Condition: Brand New – Motor Only (Base Not Included)

✅ Ideal For:

  • Residential HVAC condensing units and heat pumps
  • Outdoor fan assemblies requiring shaft-down mounting
  • Replacement for GE, Carrier, Lennox, Amana, and Emerson motors

️ Installation Tips:

  • ⚡ Disconnect power before servicing unit
  • Remove old motor and inspect mounting studs and capacitor
  • Align motor using #8-32 studs and 4.312" bolt circle
  • Connect 42 leads per wiring diagram (capacitor not included)
  • Test rotation and airflow before full reassembly
  • ️ Ensure proper clearance and airflow direction

⚠️ Installation Disclaimer:

This motor is intended for use by licensed HVAC technicians or experienced installers. Buyer is responsible for verifying compatibility with their specific condensing unit and mounting configuration. Improper installation may result in motor failure, electrical hazards, or damage to system components. Returns are not accepted on installed or used motors due to exposure and contamination risks.

Reliable cooling. Compact power. Built for residential HVAC systems.

View AllClose