Water Valve fits Hoshizaki Crescent Cuber Ice Maker, 3U0111-01, IH3U0111-01

Water Inlet Valve | 120V | 3.96 GPM | Replaces Hoshizaki® Crescent Cuber Ice Maker | Part #3U0111-01CM

Ensure consistent water flow and optimal ice production with this brand-new water inlet valve replacement, manufactured by Choice Manufactured Parts to replace Hoshizaki® part #3U0111-01. Designed for crescent cuber ice makers, this OEM-compatible valve delivers 3.96 gallons per minute at 120V / 60Hz, helping maintain proper fill levels and cycle timing for reliable ice formation in high-capacity commercial units.

⚙️ Product Specifications:

• ✅ Voltage: 120V
• Frequency: 60Hz
• Flow Rate: 3.96 GPM
• OEM-style inlet and outlet fittings
• Condition: Brand New – Unused

Replaces Part Numbers:

3U0111-01CM, 3U0111-01, IH3U0111-01
(Please confirm part number and ice maker model before purchase.)

✅ Fits Hoshizaki® Models:

CF1A-FS, CR1A-FS, KM-1100MAJ, KM-1100MAJ50, KM-1100MRJ, KM-1100MWJ, KM-1200, KM-1200MAE, KM-1200MRE, KM-1200MWE, KM-1200SAE, KM-1200SRE, KM-1200SWE, KM-1300MAF, KM-1300MAH, KM-1300MRF, KM-1300MRH, KM-1300MWF, KM-1300MWH, KM-1300NRF, KM-1300SAF, KM-1300SAF3, KM-1300SAH, KM-1300SAH3, KM-1300SRF, KM-1300SRF3, KM-1300SRH, KM-1300SRH3, KM-1300SWF, KM-1300SWF3, KM-1300SWH, KM-1300SWH3, KM-1301SAJ, KM-1301SAJ3, KM-1301SRJ, KM-1301SRJ3, KM-1301SWJ, KM-1301SWJ3, KM-1340MAJ, KM-1340MRJ, KM-1340MRJ3, KM-1340MWJ, KM-1600, KM-1600MRE, KM-1600MRE3, KM-1600MRF, KM-1600MRF3, KM-1600MRH, KM-1600MRH3, KM-1600SRE, KM-1600SRE3, KM-1600SRF1, KM-1600SRF3, KM-1600SRH, KM-1600SRH3, KM-1600SWE, KM-1600SWE3, KM-1600SWF, KM-1600SWF3, KM-1600SWH, KM-1600SWH3, KM-1601MRJ, KM-1601MRJ3, KM-1601SAJ, KM-1601SAJ3, KM-1601SRH, KM-1601SRH3, KM-1601SRJ, KM-1601SRJ3, KM-1601SWJ, KM-1601SWJ3, KM-1900SAJ, KM-1900SAJ3, KM-1900SRJ, KM-1900SRJ3, KM-1900SWJ, KM-1900SWJ3, KM-2200SRJ3, KM-2200SWJ3, KM-2600SRJ3, KM-2600SWJ3, KM-901MAJ, KM-901MRJ/3, KMD-860MAJ, KMD-860MRJ, KMD-860MWJ, KMH-2100SRJ, KMH-2100SRJ3, KMH-2100SWJ3, KMS-1402MLJ, KMS-1402MLJ-3

Common Fixes:

• ❌ Ice maker not filling with water
• ⚠️ Low ice output or slow cycles
• Water valve leaking or stuck open
• Need for OEM-compatible valve to restore proper flow

️ Installation Tips:

• Disconnect power and water supply before servicing
• Locate valve near inlet tubing and solenoid housing
• ✅ Remove mounting screws and transfer wire terminals
• Test water fill cycle after installation

⚠️ Installation Disclaimer:

This water valve is intended for use only with compatible Hoshizaki® ice maker models and configurations. Buyer is responsible for verifying fitment before purchase. Installation should follow manufacturer safety guidelines. Seller is not liable for damage or injury resulting from improper installation or use.

High flow. Reliable ice. OEM-grade water valve replacement for Hoshizaki® crescent cuber ice makers.